Skip to main content

VoIP calls encoded with SILK: from RTP to WAV


SILK is a codec defined by Skype, but can be found in many VoIP clients, like CSipSimple.
It comes in different flavours (sample rates and frame sizes), from narrowband (8 KHz) to wideband (24 KHz).
Since Wireshark doesn't allow you to decode an RTP stream carrying SILK frames, I was curious to find a programmatic way to do it. In fact, this has also allowed to me to earn a "tumbleweed" badge in stackoverflow.
You may argue that a Wireshark plugin would be the right solution, but that's probably for another day.

Initially I thought it was sufficient to read the specification for RTP payload when using SILK; the truth is that I had to reverse engineer a solution by looking at SILK SDK's test vectors.
There, I discovered that a file containing SILK audio doesn't have the file header indicated in the IETF draft ("!#SILK"), but a slightly different one ("!#SILK_V3").

More importantly, each encoded frame is not preceded by a block header, but by two bytes specifying its length.
Given these findings, it was a matter of extracting the RTP payload for each packet.

In Wireshark, I've selected the RTP stream I wanted to decode and exported it as raw binary.

A problem was that SILK doesn't have a fixed length to represent an audio frame. By using libpcap (libpcap0.8 on Debian squeeze) though, I could simply loop on the list of packets, read each length, subtract the packet header length and retrieve the exact payload length. I did this in C, but any other libpcap implementation (e.g. for python or perl) would do. Using libpcap is not strictly necessary, but helps, in particular when padding is involved.

Once the bitstream was ready, I decoded it in raw PCM format with the decoder available in the SILK SDK (downloadable from here). I knew the original encoded audio was at 24 KHz and 20 msec/frame, which also happen to be the decoder's default settings.

$ ./decoder ~/silk_from_rtp.bit ~/silk_from_rtp.raw

From the raw PCM to a WAV, handy to play on any PC, the step is easy and sox does the job. I just had to specify the sample rate, again of course 24 KHz, the encoding (16 bit unsigned, little-endian), and that was it!

$ sox -V -t raw -b 16 -e signed-integer -r 24000 silk_from_rtp.raw silk_from_rtp.wav

UPDATE (11/9/2014): The SILK SDK (and dev.skype.com) has disappeared. If you want to download it, try this (I used version 1.0.9).
Labels:

Popular posts from this blog

Troubleshooting TURN

  WebRTC applications use the ICE negotiation to discovery the best way to communicate with a remote party. I t dynamically finds a pair of candidates (IP address, port and transport, also known as “transport address”) suitable for exchanging media and data. The most important aspect of this is “dynamically”: a local and a remote transport address are found based on the network conditions at the time of establishing a session. For example, a WebRTC client that normally uses a server reflexive transport address to communicate with an SFU. when running inside the home office, may use a relay transport address over TCP when running inside an office network which limits remote UDP targets. The same configuration (defined as “iceServers” when creating an RTCPeerConnection will work in both cases, producing different outcomes.
Read more

Extracting Opus from a pcap file into an audible wav

From time to time I need to verify that the audio inside a trace is as expected. Not much in terms of quality, but more often content and duration. A few years ago I wrote a small program to transform a pcap into a wav file - the codec in use was SILK. These days I'm dealing with Opus , and I have to say things are greatly simplified, in particular if you consider opus-tools , a set of utilities to handle opus files and traces. One of those tools, opusrtp , can do live captures and write the interpreted payload into a .opus file. Still, what I needed was to achieve the same result but from a pcap already existing, i.e. "offline". So I come up with a small - quite shamlessly copy&pasted - patch to opusrtc, which is now in this fork . Once you have a pcap with an RTP stream with opus (say in input.pcap ) you can retrieve the .opus equivalent (in rtpdump.opus ) with: ./opusrtp --extract input.pcap Then you can generate an audible wav file with: ./opusd...
Read more